toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Fuel Lid Courtesy Switch|Page 12126 > < Fuel Lid Courtesy Switch|Page 12124

Camry L4-2.4L (2AZ-FXE) Hybrid (2007)

Page 4
background image

(a) Connect the connector from the cabin side.
(b) Engage the clamp and temporarily install the fuel lid courtesy switch.

(c) Install the fuel lid courtesy switch with the nut and plate from the outside of the vehicle.

Torque: 5.5 Nm (56 kgf-cm, 49in-lbf)

2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and

Repair/Installation

3. INSTALL LUGGAGE COMPARTMENT REAR TRIM COVER See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Installation
4. INSTALL REAR FLOOR FINISH PLATE See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Installation
5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Installation
6. INSTALL SPARE WHEEL COVER ASSEMBLY
7. INSTALL SPARE WHEEL COVER CLAMP
8. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

Fuel Lid Courtesy Switch|Page 12126 > < Fuel Lid Courtesy Switch|Page 12124