Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
(b) Disconnect the connector and clamp from the cabin side and remove the fuel lid courtesy switch.
From 03-2006 to 10-2006
ENGINE HOOD / DOOR: FUEL LID COURTESY SWITCH: INSTALLATION
INSTALLATION
1. INSTALL FUEL LID COURTESY SWITCH
(a) Connect the connector from the cabin side.
(b) Engage the clamp and temporarily install the fuel lid courtesy switch.
(c) Install the fuel lid courtesy switch with the nut and plate from the outside of the vehicle.
Torque: 5.5 Nm (56 kgf-cm, 49in-lbf)
2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and
Repair/Installation
3. INSTALL LUGGAGE COMPARTMENT REAR TRIM COVER See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Installation
4. INSTALL REAR FLOOR FINISH PLATE See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Installation
5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK See: Trunk / Liftgate/Trunk / Liftgate Spring/Service and Repair/Installation
6. INSTALL SPARE WHEEL COVER ASSEMBLY
7. INSTALL SPARE WHEEL COVER CLAMP
8. INSTALL LUGGAGE COMPARTMENT FLOOR MAT
From 10-2006
ENGINE HOOD / DOOR: FUEL LID COURTESY SWITCH: INSTALLATION
INSTALLATION
1. INSTALL FUEL LID COURTESY SWITCH