Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1909008.png)
Bolt (A) - Torque: 19 Nm (194 kgf-cm, 14ft-lbf)
Nut (B) - Torque: 13 Nm (133 kgf-cm, 10ft-lbf)
(b) Connect the brake pedal stroke sensor connector.
(c) Connect the stop light switch connector.
2. CONNECT MASTER CYLINDER PUSH ROD CLEVIS
(a) Apply lithium soap base glycol grease to the clevis pin.
(b) Connect the clevis pin and a new clip.
3. INSTALL BRAKE PEDAL RETURN SPRING
(a) Install the brake pedal return spring.
4. INSTALL INSTRUMENT PANEL REINFORCEMENT (for TMC Made)
