Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1062002.png)
d. Remove the 4 screws and 2 ECM brackets.
INSTALLATION
1. INSTALL HYBRID VEHICLE CONTROL ECU
a. Install the 2 ECM brackets with the 4 screws.
Torque: 3.0 N.m (31 kgf.cm, 27 in.lbf)
b. Install the ECU cover with the 3 screws.
Torque: 3.0 N.m (31 kgf.cm, 27 in.lbf)
c. Connect the 2 connectors.
NOTE: When connecting the connectors, make sure that dirt, water and other foreign matter do not become stuck between the connectors and
other parts.