Camry L4-2.4L (2AZ-FXE) Hybrid (2007)
_hybrid/Page-1063004.png)
(c) Remove the 3 screws and ECU cover.
(d) Remove the 4 screws and 2 ECM brackets.
From 03-2006 to 10-2006
P311 HYBRID VEHICLE CONTROL: HYBRID VEHICLE CONTROL ECU: INSTALLATION
INSTALLATION
1. INSTALL HYBRID VEHICLE CONTROL ECU
(a) Install the 2 ECM brackets with the 4 screws.
Torque: 3.0 Nm (31 kgf-cm, 27in-lbf)
(b) Install the ECU cover with the 3 screws.
Torque: 3.0 Nm (31 kgf-cm, 27in-lbf)
(c) Connect the 2 connectors.
NOTICE: When connecting the connectors, make sure that dirt, water and other foreign matter do not become stuck between the connectors
and other parts.
