Camry V6-3.3L (3MZ-FE) (2005)
HINT: Remove the RH side by the same procedure as the LH side
12. REMOVE FRONT STABILIZER BRACKET NO.1 LH
a. Remove the 2 bolts and disconnect the front stabilizer bracket No.1 LH.
13. REMOVE FRONT STABILIZER BRACKET NO.1 RH
HINT: Remove the RH side by the same procedures with LH side.
14. DISCONNECT PRESSURE FEED TUBE ASSEMBLY
a. Using SST, disconnect the return tube assembly from the rack & pinion power steering gear assembly.
SST 09023-12700
b. Using SST, disconnect the pressure feed tube assembly from the rack & pinion power steering gear assembly.
SST 09023-12700
c. Remove the nut and disconnect the return tube clamp.
15. REMOVE RACK AND PINION POWER STEERING GEAR ASSEMBLY