Camry V6-3.5L (2GR-FE) (2008)
16. REMOVE REAR SUSPENSION MEMBER LOWER STOPPER LH
(a) Remove the 2 nuts and the rear suspension member lower stopper LH.
17. REMOVE REAR SUSPENSION MEMBER LOWER STOPPER RH
(a) Remove the 2 nuts and the rear suspension member lower stopper RH.
18. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY
(a) Support the rear suspension member with a jack.
(b) Remove the 2 bolts, and the rear suspension member sub-assembly.
19. REMOVE REAR NO. 1 SUSPENSION ARM LH
(a) Remove the bolt and rear No. 1 suspension arm assembly LH.
Installation
SUSPENSION: REAR NO. 1 SUSPENSION ARM:
INSTALLATION
1. INSTALL REAR NO. 1 SUSPENSION ARM LH
(a) Install the rear No. 1 suspension arm (inner side) with the bolt, and temporarily tighten the bolt.
(1) Install the rear No. 1 suspension arm so that the bracket leans toward the front side of the vehicle as shown in the illustration.