Ball Joint: Specifications
- Make
- Toyota
- Model
- Camry
- Engine
- V6-3.5L (2GR-FE)
- Year
- 2008
- Section
- Suspension › Ball Joint › Specifications
Steering and SuspensionSpecifications · page 1 of 2
/Page-1868001.png)
Ball Joint: Specifications
INSPECT FRONT LOWER BALL JOINT
Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take the torque reading on the 5th turn.
Torque ............................................................................................................................................... 1.0 to 3.4 Nm (10 to 35 kgf-cm, 9 to 30 in-lbf)
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2008 Toyota Camry 3.5L
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Toyota power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.