Camry CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Connecting Rod: Service and Repair
Assembly
1. Assemble piston and connecting rod.
(a)
Using a small screwdriver, install a new snap ring on one side of the piston pin hole.
(b) Gradually heat the piston to 80° - 90° C (176° - 194° F).
(c)
Coat the piston pin with engine oil.
(d) Align the front marks of the piston and connecting rod, and push in the piston pin with your thumb.
(e)
Using a small screwdriver, install a new snap ring on the other side of the piston pin hole.
