Camry CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Connecting Rod: Service and Repair
Bushing Replacement
1. Using Special Service Tool (SST) Connecting Rod Bushing Remover and Replacer # 09222 - 30010 and a press, press out the bushing.
2. Align the oil holes of a new bushing and the connecting rod.
3. Using SST Connecting Rod Bushing Remover and Replacer # 09222 - 30010 and a press, press in the bushing.
4. Using a pin hole grinder, hone the bushing to obtain the standard specified clearance (see step 2 above) between the bushing and piston pin.
5. Check the piston pin fit at normal room temperature. Coat the piston pin with engine oil, and push it into the connecting rod with your thumb.
