Camry CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Starter Motor: Service and Repair
Removal and Installation
NOTE: Before changing the starter, check the following items again:
^ Connector connection
^ Accessory installation. e.g.: theft deterrent system
REMOVAL
1. REMOVE BATTERY AND TRAY
2. W/ CRUISE CONTROL SYSTEM:
REMOVE CRUISE CONTROL ACTUATOR
a. Disconnect the actuator connector and clamp.
b. Remove the 3 bolts, and disconnect the actuator with the bracket.
3. REMOVE STARTER
a. Disconnect the starter connector.
b. Remove the nut, and disconnect the starter wire.
c. Remove the 2 bolts and starter.
Torque: 37 N.m (380 kgf.cm, 27 ft.lbf)
INSTALLATION
Installation is in reverse order of removal.
