Camry CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Starter Motor: Service and Repair
Disassembly and Reassembly
1. REMOVE DUST PROTECTOR
2. REMOVE FIELD FRAME AND ARMATURE
a. Remove the nut, and disconnect the lead wire from the magnetic switch terminal.
Torque: 5.9 N.m (60 kgf.cm, 52 in.lbf)
b. Remove the 2 through bolts.
Torque: 5.9 N.m (60 kgf.cm, 52 in.lbf)
c. Pull out the field frame together with the armature.
ASSEMBLY NOTE: Align the protrusion of the field frame with the groove of the magnetic switch.
d. Remove the O-ring from the field frame.
ASSEMBLY HINT: Use a new O-ring.
3. REMOVE STARTER HOUSING, CLUTCH ASSEMBLY AND GEAR
a. Remove the 2 screws.
Torque: 5.9 N.m (60 kgf.cm, 52 in.lbf)
b. Remove these parts from the magnetic switch:
