Camry CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
5. Remove oil strainer and apply pipe bracket.
a. Remove the 3 bolts and the oil strainer.
b. Remove the 2 bolts and apply pipe bracket.
Torque: 10 N.m (100 kgf/cm, 7 ft. lbs.).
REMOVAL NOTICE: Be careful as oil will come out of the strainer when it is removed.
6. Disconnect solenoid connectors.
7. Remove oil pipes.
-
Pry up the both pipe ends with a large screwdriver and remove the 4 pipes.
NOTICE: Be careful not to bend or damage the pipe.
8. Remove valve body.
-
Remove the 12 bolts.
Torque: 10 N.m (100 kgf/cm, 7 ft. lbs.).
Bolt length:
A: 20 mm (0.79 in.)
B: 25 mm (0.98 in.)
C: 36 mm (1.42 in.)
D: 50 mm (1.97 in.)