Camry Coupe 2-Door V6-3.0L (1MZ-FE) (1996)
-
Install the RH mounting Stay with the 3 bolts.
Torque: 31.4 Nm (320 kgf.cm, 23 ft.lb)
-
Connect these hoses and connectors:
(1) Radiator inlet hose
(2) Radiator reservoir hose
(3) ECT sensor connector
(4) ECT switch connector
(5) Ground strap connector
10. REINSTALL INTAKE MANIFOLD ASSEMBLY
-
Install the intake manifold assembly with the 9 bolts, 2 plate washers and 2 nuts.
Torque: 15 Nm (150 kgf.cm, 11 ft.lb)
-
Connect the heater hose to the intake manifold.
11. RECONNECT INJECTOR CONNECTORS
12. RETIGHTEN WATER OUTLET MOUNTING BOLTS AND NUTS
Torque: 15 Nm (150 kgf.cm, 11 ft.lb)
13. REINSTALL AIR INTAKE CHAMBER ASSEMBLY
14. REINSTALL AIR CLEANER HOSE