Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
/Page-1655001.png)
Ignition Lock: Service and Repair
Automatic Transaxle
With Engine Immobilizer
KEY CYLINDER
1. Inspect steering lock operation. Check that the steering lock mechanism operates properly.
2. If necessary, replace key cylinder.
a. Place the ignition key at the ACC position.
b. Push down the stop pin with a screwdriver, and pull out the cylinder.
c. Install a new cylinder.
NOTE: Make sure the key is at the ACC position.
For additional information refer to Steering and Suspension / Steering / Steering Column / See: Steering and Suspension/Steering/Steering Column
Without Engine Immobilizer
KEY CYLINDER
1. Inspect steering lock operation. Check that the steering lock mechanism operates properly.
2. If necessary, replace key cylinder.
