Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
d. Install the bearing retainer with the 4 screws.
Torque: 3.0 N.m (31 kgf.cm, 27 in.lbf)
2. REPLACE REAR BEARING
a. Using SST, remove the bearing cover (outside) and bearing.
SST 09820 - 00021
NOTE: Be careful not to damage the fan.
b. Remove the bearing cover (inside).
c. Place the bearing cover (inside) on the rotor.
d. Using SST and a press, press in a new bearing.
SST 09820 - 00030
e. Using SST, push in the bearing cover (outside).
SST 09285 - 76010