Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
/Page-426002.png)
(a) Install the oil ring expander and two side rails by hand.
(b) Using a piston ring expander, install the two compression rings with the code mark facing upward.
Code mark:
No.1: 1 N or T
No.2: 2N or 2T
(c) Position the piston rings so that the ring ends are as shown.
NOTICE: Do not align the ring ends.
3. INSTALL BEARINGS
(a) Align the bearing claw with the groove of the connecting rod or connecting cap.
(b) Install the bearings in the connecting rod and connecting rod cap.
INSTALLATION
