Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
/Page-426001.png)
Piston: Service and Repair
PISTON AND CONNECTING ROD ASSEMBLY
1. ASSEMBLE PISTON AND CONNECTING ROD
(a) Install a new snap ring on one side of the piston pin hole.
(b) Gradually heat the piston to 80-90°C (176-194°F).
(c) Coat the piston pin with engine oil.
(d) Align the front marks of the piston and connecting rod, and push in the piston pin with your thumb.
(e) Install a new snap ring on the other side of the piston pin hole.
2. INSTALL PISTON RINGS
