Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
/Page-1192005.png)
c. Using a pin punch and hammer, drive in the slotted spring pin.
Drive in depth: 23.5 ± 1.0 mm (0.925 ± 0.039 in.)
5. INSTALL SHIFT INNER LEVER NO.2 AND SELECT SPRING SEAT NO.2
a. Install the shift inner lever No.2, spring and select spring seat No.2.
b. Using a screwdriver and hammer, tap in the E-ring.
6. INSTALL CONTROL SHAFT COVER, DUST BOOT AND CONTROL SHIFT LEVER
a. Install the control shaft cover and dust boot.
HINT: Make sure to install the boot in correct direction. Position the air bleed of the boot downward.
