Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
/Page-1192004.png)
b. Using SST and a hammer, tap in a new oil seal until its surface is flush with the shaft cover surface.
SST 09608-20012 (09608-00080, 09608-03020)
c. Coat the lip of the oil seal with MP grease.
3. INSTALL E-RING TO SHIFT AND SELECT LEVER SHAFT
4. INSTALL SELECT SPRING SEAT, SHIFT INNER LEVER NO.1 AND SHIFT INTERLOCK PLATE
a. Install the select spring seat and spring.
b. Install the shift inner lever No.1 with the shift interlock plate.
HINT: One of the spline teeth of the shift and select lever shaft has been eliminated. Therefore, be certain to correctly align this portion to the
matching portions on the parts during assembly.
