Camry Solara SE L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-328001.png)
Connecting Rod: Specifications
Torque Specifications
Connecting Rod Bolts
Standard Diameter ............................................................................................................................................. 7.860 - 8.000 mm (0.3094 - 0.3150 inch)
Minimum Diameter ........................................................................................................................................................................ 7.60 mm (0.2992 inch)
Tightening Torque
Step 1 ....................................................................................................................................................................................................... 25 Nm (18 ft.lb)
Step 2 ................................................................................................................................................................................................................... Turn 90°
Apply a light coat of engine oil on the threads and under the heads of the connecting rod cap bolts.
Install and alternately tighten the 2 connecting rod cap nuts in several passes.
