toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Balance Shaft|Specifications|Page 1158 > < Camshaft Timing Oil Control Valve <--> [Variable Valve Timing Actuator]|Description and Operation

Camry Solara SE L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)

Page 1
background image

Balance Shaft: Specifications

Thrust clearance

Standard ........................................................................................................................................................................  0.06-0.11 mm (0.0024-0.0043 in)
Maximum ..........................................................................................................................................................................................  0.11 mm (0.0043 in)

Backlash (punch mark A)

Standard ....................................................................................................................................................................  0.005-0.040 mm (0.0002-0.0016 in)

Backlash (punch mark B)

Standard ....................................................................................................................................................................  0.005-0.060 mm (0.0002-0.0024 in)

NOTE:For location of punch marks, see See: Testing and Inspection

Torque and Torque Sequence

NOTE:Uniformly tighten the 6 bolts in several passes according to the sequence shown.

Torque ........................................................................................................................................................................................................  49 Nm (36 ft lbs)

Balance Shaft|Specifications|Page 1158 > < Camshaft Timing Oil Control Valve <--> [Variable Valve Timing Actuator]|Description and Operation