Camry Solara SLEV6 V6-3.0L (1MZ-FE) (2000)
/Page-1365004.png)
b. Install SST to the torsion bar on the hinge side.
SST 09804-24010
c. Push down on SST, and pull the luggage compartment door hinge from the torsion bar.
d. Slowly lift SST, and remove the torsion bar from the torsion bar bracket with SST.
e. Remove the torsion bar.
f.
Repeat for the other side.
INSTALLATION
1. INSTALL TORSION BAR
a. Insert the torsion bar into the bracket.
HINT: The center bracket opening is the nominal position of the torsion bar. If needed, move the torsion bar to the upper or lower hole to
provide the correct luggage door lift.
