Camry Wagon L4-2.0L (3S-FE) (1990)
IF REMOVING ENGINE AND TRANSAXLE ASSEMBLY FROM VEHICLE, ATTACH THE ENGINE HOIST CHAIN TO THE ENGINE
HANGERS
(2WD) Remove the bolt, four nuts and RH mounting insulator.
(4WD) Remove the through bolt, two nuts and RH mounting insulator.
Remove the through bolt, three bolts (2WD, M/T), four bolts (Others) and LH mounting insulator.
Remove the three bolts and LH mounting bracket.
THE ENGINE AND TRANSMISSION ASSEMBLY MAY NOW BE LIFTED OUT OF THE VEHICLE.