Camry Wagon L4-2.0L (3S-FE) (1990)
/Page-355003.png)
INSTALLATION
(2WD) Attach the RH mounting insulator to the mounting bracket and body, and temporarily install the bolt and nut.
(2WD) Temporarily install the mounting stay bolt (A).
(4WD) Attach the RH mounting insulator to the mounting bracket and body, and temporarily install the through bolt and two nuts.
Install the LH mounting bracket to the transaxle case with the three bolts. Torque the bolts.
Torque: 530 kg.cm. (38 ft.lb., 52 N.m)
Attach the LH mounting insulator to the mounting bracket and body with the through bolt and three bolts (2WD M/T) or four bolts (Others), and
install and torque the bolts.
Torque:
Bolt: 530 kg.cm. (38 ft.lb., 52 N.m)
Through bolt: 890 kg.cm. (64 ft.lb., 87 N.m)
