Camry Wagon L4-2.0L (3S-FE) (1990)
(2WD) Torque the bolt and four nuts of the RH mounting insulator. Do not torque the bolt (A) yet.
Torque:
Nut To bracket: 530 kg.cm. (38 ft.lb., 52 N.m)
Nut To body: 900 kg.cm. (65 ft.lb., 88 N.m)
Bolt: 650 kg.cm. (47 ft.lb., 64 N.m)
(4WD) Torque the through bolt and two nuts of the RH mounting insulator.
Torque:
Nut: 530 kg.cm. (38 ft.lb., 52 N.m)
Through bolt: 890 kg.cm. (64 ft.lb., 87 N.m)
Remove the engine hoist chain from the engine.
INSTALL ENGINE RH MOUNTING STAY
(2WD) Install the mounting stay with the three bolts. Torque the bolts.
Torque: 740 kg.cm. (54 ft.lb., 73 N.m)
(4WD) Install the mounting stay with the bolt and nut. Torque the bolt and nut.
Torque: 740 kg.cm. (54 ft.lb., 73 N.m)
(A/T) INSTALL ENGINE LH MOUNTING STAY