Camry Wagon L4-2.0L (3S-FE) (1990)
/Page-832009.png)
7. RECHECK PISTON STROKE OF DIRECT CLUTCH
Using a dial indicator, measure the piston stroke while applying and releasing the compressed air (4 - 8 kg/sq.cm, 57 - 114 psi or 392 - 785 kPa)
as shown.
Piston stroke: 1.21-1.91 mm
(0.0476 0.0752 in.)
Overdrive Unit (Part 2)
DISASSEMBLY OF COUNTER DRIVE GEAR
1. CHECK OPERATION OF ONE-WAY CLUTCH
a. While turning the overdrive gear clockwise, install the overdrive direct clutch into the one-way clutch.
b. Hold the overdrive direct clutch and turn the intermediate shaft. The shaft should turn freely clockwise and should lock counterclockwise.
c. Remove the overdrive direct clutch.
2. CHECK COUNTER DRIVE GEAR PRELOAD
a. Hold the intermediate shaft in a vise with soft laws.
b. Using a tension gauge, measure the preload.
Preload (at starting): 920 - 1,530 g
(2.0 - 3.4 lb, 9 - 15 N)
HINT: Turn the counter drive gear right and left several times before measuring the preload.
