Camry Wagon L4-2.0L (3S-FE) (1990)
3. REMOVE RETAINING PLATE
a. Remove the snap ring with a screwdriver.
b. Remove the retaining plate.
4. REMOVE ONE-WAY CLUTCH AND OUTER RACE
5. REMOVE NO.3 OVERDRIVE PLANETARY THRUST WASHER
6. REMOVE ONE-WAY CLUTCH FROM OUTER RACE
Note the direction of the one-way clutch.
7. REMOVE PLUGS FROM PLANETARY GEAR
Remove the four plugs with a magnetic finger.
HINT: Be careful not to lose them.
8. REMOVE ADJUSTING NUT AND WASHER