Camry Wagon L4-2.0L (3S-FE) (1990)
/Page-872023.png)
3. INSTALL AND FINGER TIGHTEN BOLTS IN LOWER VALVE BODY
Install and finger tighten the three bolts.
HINT: Each bolt length (mm (in.)) is indicated in the figure.
4. INSTALL LOWER VALVE BODY COVER
a. Install the lower valve body cover over the new gasket.
b. Install and finger tighten the fourteen bolts.
HINT: Each bolt length (mm (in.)) is indicated in the figure.
5. INSTALL AND FINGER TIGHTEN BOLTS IN UPPER VALVE BODY
Install and finger tighten the three bolts.
HINT: Each bolt length (mm (in.)) is indicated in the figure.
6. INSTALL SLEEVE STOPPER
