Camry Wagon L4-2.0L (3S-FE) (1990)
1. POSITION PLATE AND NEW GASKETS ON LOWER VALVE BODY
Position the new No.2 gasket, the plate and then the new No.1 gasket on the lower valve body.
HINT: Since No. 1 gasket and No.2 gasket are similar use the illustration below to discriminate between them.
2. PLACE LOWER VALVE BODY WITH PLATE AND GASKETS ON UPPER VALVE BODY
HINT: Hold the lower valve body, gaskets and plate securely so they do not separate.
Align each bolt hole in the valve bodies with the gaskets and plate.