Camry Wagon L4-2.0L (3S-FE) (1990)
/Page-889008.png)
2-1.
(TOYOTA TYPE)
REMOVE INBOARD JOINT BOOT CLAMP
2-2.
(GKN TYPE)
REMOVE INBOARD JOINT BOOT CLAMP
(a) Using a boot clamp tool, draw hooks together and remove the large clamp.
(b) Using side cutters, cut small boot clamp and remove it.
3. DISASSEMBLE INBOARD JOINT TULIP
(a) Place matchmarks on the inboard joint tulip and tripod.
NOTICE: Do not punch the marks.
(b) Remove the inboard joint tulip from the drive shaft.
