Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
/Page-982004.png)
b. Using SST and a hammer, drive in a new oil seal.
SST 09620-30010 (09627-30010, 09631-00020)
Drive in depth: 0 - 1.0 mm (0 - 0.039 in.)
c. Coat the oil seal lip with MP grease.
SHIFT AND SELECT LEVER SHAFT ASSEMBLY
1. COAT SHAFT WITH MP GREASE, AS SHOWN
2. INSTALL DUST BOOT AND CONTROL SHAFT COVER
a. Install the dust boot to the control shaft cover as shown.
