Camry Wagon V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1993)
b. Install the control shaft to the control shaft cover.
3. INSTALL SNAP RING
Using a brass bar and hammer, install the snap ring.
4. INSTALL SELECT INNER LEVER
a. Install the No.1 select spring seat, No.1 compression spring and select inner lever.
b. Using a pin punch and hammer, drive in the slotted spring pin.
Drive in depth: 0 ± 0.5 mm (0 ± 0.020 in.)
c. Check that the No.1 select spring seat slides smoothly.
5. INSTALL SHIFT INTERLOCK PLATE AND NO.1 SHIFT INNER LEVER