Camry Wagon V6-2507cc 2.5L DOHC (2VZ-FE) (1988)
(a) Install the mounting bracket with the three bolts. Torque the bolts.
Torque: 57 ft-lb (790 kg-cm, 77 N.m)
(b) Temporarily install the mounting insulator with the through bolt and a new nut.
INSTALL CENTER ENGINE MOUNTING BRACKET AND INSULATOR ASSEMBLY
-
Install the mounting bracket and insulator assembly with the three bolts. Torque the bolts.
Torque: 38 ft-lb (530 kg-cm, 61 N.m)
INSTALL REAR ENGINE MOUNTING BRACKET AND INSULATOR
(a) Install the mounting bracket with the three bolts. Torque the bolts.
Torque: 57 ft-lb (790 kg-cm, 77 N.m)
(b) Temporarily install the mounting insulator with the through bolt and a new nut.
INSTALL ENGINE MOUNTING CENTER MEMBER
(a) Install the engine mounting center member with the four bolts. Torque the bolts.
Torque: 29 ft-lb (400 kg-cm, 39 N.m)