Camry Wagon V6-2507cc 2.5L DOHC (2VZ-FE) (1988)
(a) Install the No.1 mounting stay with the three bolts. Torque the bolts.
Torque: 38 ft-lb (530 kg-cm, 52 N.m)
(b) Install the No.2 mounting stay with the bolt and nut. Torque the bolt and nut.
Torque:
Bolt: 48 ft-lb (670 kg-cm, 66 N.m)
Nut: 38 ft-lb (530 kg-cm, 52 N.m)
INSTALL ENGINE LH MOUNTING STAY
(M/T)
-
Install the mounting stay with the bolt and two nuts. Torque the bolt and nuts.
Torque:
Nut 38 ft-lb (530 kg-cm, 52 N.m)
Bolt 14 ft-lb (195 kg-cm, 19 N.m)
(A/T)
-
Install the mounting stay with the three nuts. Torque the nuts.
Torque:
12 mm nut: 15 ft-lb (210 kg-cm, 21 N.m)
14 mm nut: 38 ft-lb (530 kg-cm, 52 N.m)
INSTALL FRONT ENGINE MOUNTING BRACKET AND INSULATOR