Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
14. REMOVE NO.1 TIMING BELT COVER
a. Disconnect the crankshaft position sensor wire from the clamp on the timing belt cover.
b. Disconnect the clamp of the crankshaft position sensor wire from the timing belt cover.
c. Remove the 4 bolts and timing belt cover.
15. REMOVE TIMING BELT GUIDE
16. REMOVE TIMING BELT
HINT: When re-using timing belt: Draw a direction arrow on the timing belt (in the direction of engine revolution), and place matchmarks on the
timing belt and crankshaft timing pulley.
17. REMOVE NO.1 IDLER PULLEY AND TENSION SPRING
Remove the bolt, pulley and tension spring.
18. REMOVE NO.2 IDLER PULLEY
Remove the bolt and pulley.
19. REMOVE CRANKSHAFT TIMING PULLEY
If the pulley cannot be removed by hand, use SST to remove the timing pulley.
SST 09950-50012 (09951-05010, 09952-05010, 09953-05010, 09953-05020, 09954-05010)
NOTICE: Do not scratch the angle sensor of the timing pulley.