Camry XLE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
_mfi/Page-222002.png)
If circuit is as specified, perform the inspection below.
If the circuit is not as specified, inspect the circuit connected to other parts.
INSPECT AUTOMATIC LIGHT CONTROL SENSOR CIRCUIT
Connector disconnected:
Connect the wire harness side connector to the sensor and inspect wire harness side connector from the back side, as shown.
HINT:
-
Ignition switch ON.
-
Light control switch OFF.
-
Vehicle's surroundings are bright.
If circuit is as specified, try replacing the sensor with a new one.
If the circuit is not as specified, inspect the circuit connected to other parts.
