Automatic Light Control Sensor for Camry XLE Sedan | Component Locations
Automatic Light Control Sensor: Testing and Inspection
INSPECT AUTOMATIC LIGHT CONTROL
Auto ON
a. Turn the ignition switch ON.
b. Turn the light control switch to OFF.
c. Parking brake lever released.
d. Gradually cover the top of the sensor.
e. Verify that the lights should turn ON the accessory lights and the headlights.
Auto OFF
a. Gradually expose the sensor.
b. Verify that the lights should turn OFF the headlights and the accessory lights.
INSPECT AUTOMATIC LIGHT CONTROL SENSOR CIRCUIT
Connector disconnected:
Disconnect the connector from the sensor and inspect the connector on the wire harness side, as shown in the table.