Celica L4-1998cc 2.0L DOHC (3S-GE) (1986)
/Page-198005.png)
Timing Belt Removal
22. Remove No.1 idler pulley and tension spring by removing the bolt, pulley and tension spring.
Timing Belt Removal
23. Remove No.2 Idler pulley be removing the bolt and pulley.
Timing Belt Removal
24. Remove crankshaft timing pulley.
a. If the pulley cannot be remove by hand, use two screwdrivers
NOTE: Position shop ranges as shown in image to prevent damage to engine.
Timing Belt Removal
25. Using SST (09616-30011), remove the oil pump pulley by removing the nut and pulley.
Timing Belt Installation
1. Install Oil Pump Pulley
a. Align the cutouts of the pulley and shaft,and slide the pulley.
