Celica L4-1998cc 2.0L DOHC (3S-GE) (1986)
Timing Belt: Service and Repair
Timing Belt Replace
Timing Belt Removal
Timing Belt Components Exploded View
1. Disconnect cable from negative terminal of battery.
2. Remove right hand front wheel
3. Remove engine right hand under cover.
4. Remove radiator reservoir tank
5. Remove cruise control actuator and bracket
a. Disconnect the ground strap connector
b. Remove the actuator cover.
c. Disconnect the actuator vacuum hose.
d. Disconnect the actuator connector.
e. Remove the actuator together with the bracket.
6. Loosen power steering oil reservoir tank.
a. Remove the two bolts without disconnecting the hoses.
7. Remove drive belts
8. Remove alternator
a. Disconnect alternator connector
b. Disconnect alternator wire
c. Disconnect oxygen sensor connector
d. Disconnect A/C compressor connectors
e. Disconnect water temperature switch connector.
f. Remove drive belt
g. Remove the two bolts and the alternator.
9. Remove alternator bracket.
10. Raise the engine enough to remove the weight from the engine mount on the right side of engine.