Celica GT-S L4-1.8L (2ZZ-GE) (2000)
/Page-843002.png)
7. REMOVE ATF TEMPERATURE SENSOR
Remove the bolt and lock plate, and remove the ATF temperature sensor.
8. SEPARATE WIRE HARNESS FROM 2 CLAMPS
9. REMOVE VALVE BODY
Remove the 17 bolts and valve body.
NOTICE: Be careful not to drop the check valve body, spring and accumulator piston.
10. REMOVE CHECK BALL BODY AND SPRING
11. REMOVE 3 APPLY GASKETS
12. REMOVE SHIFT SOLENOID VALVE
Remove the 5 bolts and 5 shift solenoid valves.
13. INSTALL SHIFT SOLENOID VALVE
Install the 5 shift solenoid valves with the 5 bolts.
Torque:
Bolt A: 6.6 Nm (67 kgf-cm, 58 inch lbs.)
Bolt B: 11 Nm (110 kgf-cm, 8 ft. lbs.)
Bolt length:
Bolt A: 12 mm (0.47 inch)
Bolt B: 45 mm (1.77 inch)
