Celica GT-S L4-1.8L (2ZZ-GE) (2000)
/Page-843004.png)
20. INSTALL OIL STRAINER
a) Coat a new O-ring with ATF.
b) Install the O-ring to the oil strainer.
c) Install the oil strainer with the 3 bolts.
Torque: 11 Nm (110 kgf-cm, 8 ft. lbs.)
21. INSTALL MAGNET IN OIL PAN
Install the 3 magnets in the oil pan, as shown in the illustration.
22. INSTALL OIL PAN
Install the oil pan and a new gasket with the 18 bolts.
Torque: 7.8 Nm (80 kgf-cm, 69 inch lbs.)
23. INSTALL DRAIN PLUG
Install a new gasket and drain plug.
Torque: 49 Nm (500 kgf-cm, 36 ft. lbs.)
24. FILL ATF AND CHECK ATF LEVEL
25. INSTALL LH ENGINE UNDER COVER
