Trunk / Liftgate: Liftgate Window Glass Specs | Celica GT 2001
c. Cut the adhesive by pulling the piano wire around it.
HINT: Cut the adhesive areas as shown in the illustration.
INSTALLATION
1. CLEAN AND SHAPE CONTACT SURFACE OF BODY
a. Using a knife, cut away any rough areas on the body.
HINT: Leave the adhesive on the body as much as possible.
b. Clean the cutting surface of the adhesive with a shop rag saturated in cleaner.
HINT: Even if all the adhesive has been removed, clean the body.
2. CLEAN REMOVED GLASS
a. Place marks for installing new clips to the glass.
b. Remove the damaged clips and dams.
c. Using a scraper, remove the adhesive sticking to the glass.
d. Clean the glass with cleaner.
NOTE:
-
Do not touch the glass after cleaning it.
-
Be careful not to damage the glass.
3. If reusing the glass: