Celica GT L4-1.8L (1ZZ-FE) (2001)
3. REMOVE STEEL BALL
Using a magnetic finger, remove the steel ball from the clutch shaft hole.
4. REMOVE ARMATURE FROM MAGNETIC SWITCH ASSEMBLY
a. 1ZZ-FE
Remove the armature from the magnetic switch assembly.
b. 2ZZ-GE:
Using a press, remove the armature from the magnetic switch assembly.
REASSEMBLY
HINT: Use high-temperature grease to lubricate the bearings and gears when assembling the starter.
1. INSTALL ARMATURE TO MAGNETIC SWITCH ASSEMBLY
a. 2ZZ-GE:
Rotating the ring of the front bearing, set it properly so that the projection of the ring is positioned in the narrowest part.