toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Camshaft, Engine|Removal|Page 1304 > < Camshaft, Engine|Removal|Page 1302
Page 11
background image

26. Disconnect fuel inlet hose from delivery pipe.

Remove the union bolt and 2 gaskets, and disconnect the inlet hose from the delivery pipe.

27. Disconnect fuel return hose from return pipe.
28. Remove intake manifold.

(a)

Remove the 6 bolts and 2 nuts. 

(b) Disconnect the engine wire between the intake manifold and cylinder head.
(c)

Remove the intake manifold and gasket.

29. California only: Remove air hose for air assist system.

Disconnect the air hose from the cylinder head port, and remove the air hose.

30. Remove delivery pipe and injectors.

(a)

Remove the 2 bolts and delivery pipe together with the 4 injectors.

CAUTION:  Be careful not to drop the injectors when removing the delivery pipe.

(b) Remove the 4 insulators (except California) and 2 spacers from the cylinder head.
(c)

Pull out the 4 injectors from the delivery pipe.

(d) California: Remove the 2 O-rings, insulator and grommet from each injector.
(e)

Except California: Remove the O-ring and grommet from each injector.

31. Disconnect timing belt from camshaft timing pulley.
32. Remove camshaft timing pulley.
33. Remove No. 1 idler pulley and tension spring.

Remove the bolt, pulley and tension spring.

Camshaft, Engine|Removal|Page 1304 > < Camshaft, Engine|Removal|Page 1302