Celica GT Convertible L4-2164cc 2.2L DOHC MFI (1997)
34. Remove No. 3 timing belt cover.
Remove the 3 bolts and timing and cover.
CAUTION:
^
Support the timing belt. so the meshing of the crankshaft timing pulley and timing belt does not shift.
^
Be careful not to drop anything inside the timing belt cover.
^
Do not allow the belt to come into contact with oil, water or dust.
35. Remove engine hangers and generator bracket.
(a)
Remove the 3 bolts, the generator bracket and RH engine hanger assembly.
(b) Remove the bolt and LH engine hanger.
36. Remove oil pressure switch.
37. Remove cylinder head cover.
Remove the 4 nuts, grommets, head cover and gasket.
NOTE: Arrange the grommets in the correct order, so that they can be reinstalled into their original positions. This minimizes any possibility of
oil leakage due to reuse of the grommets in different positions.
38. Remove high-tension cord clamp, PCV valve and hoses from cylinder head cover.
(a)
Remove the bolt and high-tension cord clamp.
