Celica GT Convertible L4-2164cc 2.2L DOHC MFI (1997)
Evaporator Case: Service and Repair
Removal and Installation
COOLING UNIT REMOVAL
1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
INSTALLATION HINT: Evacuate air from refrigeration system.
See: Service and Repair/Discharging & Evacuating System
Charge system with the refrigerant and inspect for leakage of refrigerant.
See: Service and Repair/Charging the System
Specified amount:
650 ± 50 9 (22.92 ± 1.76 oz.)
2. DISCONNECT SUCTION TUBE AND LIQUID TUBE FROM COOLING UNIT FITTING
Torque: 10 N.m (100 kgf.cm, 7 ft.lbf)
REMOVAL NOTE: Cap the open fittings immediately to keep moisture out of the system.
INSTALLATION HINT: Lubricate 2 new O-rings with compressor oil and install the tubes.
3. REMOVE GROMMETS
4. REMOVE DRAIN PIPE GROMMET
5. REMOVE GLOVE COMPARTMENT PARTS
6. REMOVE COOLING UNIT
a. Disconnect the connectors.
b. Remove 3 nuts and 4 bolts.
INSTALLATION
Installation is in the reverse order of removal.