Celica GT Convertible L4-2164cc 2.2L DOHC MFI (1997)
b. Using a plastic hammer, tap out the valve assembly from the valve housing, taking care to be careful not to damage the oil seal lip.
15. Remove the rack housing no. 2 bracket after doing these procedures.
a. Place matchmarks on the bracket and rack housing.
b. Remove the bolt.
16. Remove the grommet from the rack housing NO. 2 bracket.
17. Remove the cylinder end stopper by doing the following.
a. Using a snap ring pliers, remove the snap ring from the rack housing.
b. Remove the stopper from the rack housing.
18. Remove the steering rack and oil seal by following these steps.
a. Using the 09950 - 60010 09951 - 00250), 09950 - 70010 (09951 - 07200) SST, press out the rack and oil seal, taking care to not to drop the
rack.
b. Remove the oil seal from the rack.
