Celica GT Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
_mfi/Page-1247003.png)
a. Remove the 4 screws and rectifier holder.
b. Remove the 4 rubber insulators.
5. REMOVE PULLEY
a. Hold SST (A) with a torque wrench, and tighten SST (B)clockwise to the specified torque.
SST O982-63O1O
Torque: 39 Nm (400 kgf.cm, 29 ft.lbf)
b. Check that SST (A) is secured to the rotor shaft.
c. Mount SST (C) in a vise.
d
Insert SST (B) into SST (C), and attach the pulley nut to SST (C).
