Celica GT Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1999)
e. To loosen the pulley nut, turn SST (A) in the direction shown in the illustration.
NOTE: To prevent damage to the rotor shaft, do not loosen the pulley nut more than one half of a turn.
f.
Remove the generator from SST (C).
g. Turn SST (B), and remove SST (A and B).
h
Remove the pulley nut and pulley.
6. REMOVE RECTIFIER END FRAME
a. Remove the 4 nuts.
b. Using SST, remove the rectifier end frame.
SST O9286-6O11